HP 2520G-POE - Manual (Page 29)

2-9
Installing the Switch
Installation Procedures
W A R N I N G For safe operation, please read the mounting precautions on
page 2-3 , before mounting a switch.
E q u i p m e n t
C a b i n e t
N o t e The 12-24 screws supplied with the switch are the correct threading for
standard EIA/TIA open 19-inch racks. If installing the switch in an equipment
cabinet such as a server cabinet, use the clips and screws that came with the
cabinet in place of the 12-24 screws that are supplied with the switch.
Rack Mounting the Switch 2520G-24-PoE
1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
Figure 2-3. Attaching mounting brackets
W A R N I N G For safe reliable installation, only use the screws provided in the
accessory kit to attach the mounting brackets to the switch.
N o t e The mounting brackets have multiple mounting holes and can be rotated
allowing for a wide variety of mounting options. These include mounting the
switch so that its front face is flush with the face of the rack, or mounting it
in a more balanced position.