HP ProLiant DL385 - Manual (Page 68)

68 HP ProLiant DL385 Server User Guide
Power supply blank
Loosen the thumbscrew that secures the redundant power supply blank, and then
pull the blank from the back of the server.
Hot-plug SAS hard drive options
When adding hard drives to the server, observe the following general guidelines:
• The system automatically sets all drive numbers.
• If only one hard drive is used, install it in the bay with the lowest drive
number.
• Hard drives must be SFF types.
• Drives should be the same capacity to provide the greatest storage space
efficiency when drives are grouped together into the same drive array.
SAS drive numbers