HotBrick VPN 800/8 F - Manual (Page 69)

HotBrick, Tel: 305-398-0888, Fax: 305-398-5966
Appendix B
Windows TCP/IP Setup
Overview
TCP/IP Settings
If using the default Load Balancer settings, and the default Windows 95/98/ME/2000
settings, no changes need to be made.
 By default, the VPN800/8 F Firewall will act as a DHCP Server, automatically providing
a suitable IP Address (and related information) to each PC when the PC boots.
 For all non-Server versions of Windows, the default TCP/IP setting is to act as a DHCP client.
 If you wish to check your TCP/IP settings, the procedure is described in the following sections.
 If your LAN has a Router, the LAN Administrator must re-configure the Router itself.
Checking TCP/IP Settings - Windows 9x/ME:
1. Select Control Panel - Network. You should see a screen like the following:
2. Select the TCP/IP protocol for your network card.
3. Click on the Properties button. You should then see a screen like the following.
69