HotBrick VPN 800/8 F - Manual (Page 33)

HotBrick, Tel: 305-398-0888, Fax: 305-398-5966
Advanced co nfi gurati on - Special Applicat ion
If you use Internet applications that use non-standard connections or port numbers, you
may find that they do not function correctly because they are blocked by the VPN800/8 F
Firewall. In this case, you must define the application as a "Special Application”
in order for the application to work.
Note that the terms "Incoming" and "Outgoing" on this screen refer to traffic from the client
(PC) viewpoint
Advanced configuration - Special Application.
 Enable – Use this to Enable or Disable this Special Application as required
 Name – Enter a descriptive name to identify this Special Application.
 Outgoing Protocol –Select the protocol used by this application, when sending
data to the remote server or PC.
 Outgoing Port Range – Enter the beginning and end of the range of port numbers
used by the application server for data you send. If the application uses a single
port number, enter it in both fields.
 Incoming Protocol – Select the protocol used by this application when receiving
data from the remote server or PC.
 Incoming Port Range –Enter the beginning and end of the range of port numbers
used by the application server, for data you receive. If the application uses a single
port number, enter it in both fields.
Buttons
 Add – Create a new Special Application entry.
 Delete – Delete the selected entry.
 Update – Save any changes you have made to the current entry.
 Cancel – Cancel any changes you have made since the last save operation.
33