HotBrick VPN 800/8 F User Manual

Page 35

HotBrick, Tel: 305-398-0888, Fax: 305-398-5966

Dynamic DNS Service

This pull-down menu can Enable/Disable the Dynamic DNS feature, and select the required
service provider.

 Disable – Dynamic DNS is not used.
 TZO – Select this to use the TZO service (www.tzo.com). You must configure the

TZO section of this screen.

 DynDNS – Select this to use the standard service (from www.dyndns.org or another

provider). You must configure the Standard Client section of this screen.

 3322(in China) – This service is available in China. It is similar to “DynDNS”
 User Defined DDNS Server – This is the user defined DDNS server. If the DDNS

is not TZO, dyndns.org and 3322.

Additional settings

These options are available if using the standard client.

 Enable Wildcard – If selected, traffic sent to sub-domains (of your Domain name)

will also be forwarded to you.

 Enable backup MX – If enabled, you must enter the Mail Exchanger address

below.

 Mail Exchanger – If the setting above is enabled, enter the address of the backup

Mail Exchanger.

WAN Port Binding

 Select the WAN port used by the Dynamic DNS service.
 The "Force Update" button will update your record on the Dynamic DNS Server

immediately.