HotBrick VPN 800/8 F - Manual (Page 6)

HotBrick, Tel: 305-398-0888, Fax: 305-398-5966
Oth er Featu res

 DHCP Server Support
Dynamic Host Configuration Protocol provides dynamic IP addresses to PCs and other
devices upon request. The VPN800/8 F Firewall can act as a DHCP Server for devices
on your local LAN.
 Multi Segment LAN Support
LANs containing one or more segments are supported, via the Multi-WAN VPN Load
Balancer's built-in static routing table or LAN ANY IP settings.
 Easy Setup
Use your favorite WEB browser for configuration.
 Remote Management
The VPN800/8 F Firewall can be managed from any PC on your LAN. If the Internet
connection is active, the unit can also (optionally) be configured via the Internet.
 Password - protected Configuration
Optional password protection is provided to prevent unauthorized users from modifying the
configuration data and settings.
 HTTP Firmware Upgrade and backup
The web management feature allows you to use HTTP to upgrade new firmware and backup
the system configuration from the local or even from the remote site (as long as you enable “Remote
Upgrade” and “Remote web-based setup” from the Advanced Feature web page).
 Email Alert
A warning email can be sent to the system administrator if one of the WAN ports drops
provided two WAN ports are enabled. Also, there is excessive ping notification available.
 Syslog
Real time system information can be generated on the web page or a particular machine. This is
very useful when monitoring the device.
 QoS Configuration.
This function gives specified packets a higher priority for pass-through. This is especially useful
if you have real-time applications like Internet phone, video conference etc.
 UPnP
If UPnP (Universal Plug & Play) is set to “Enable”, the VPN800/8 Firewall becomes one of
the network devices. This is useful for discovering and controlling network devices, such as the Internet
gateway.
6

