HotBrick VPN 800/8 F User Manual

Page 57

HotBrick, Tel: 305-398-0888, Fax: 305-398-5966

 Policy Name List – When adding a new Policy, ignore this list. To edit an existing entry, select it from

thelist and then click the"Select" button.Thedata fieldswill beupdated with data for the selected
entry.

 Policy Name – Enter a suitable name. Generally, you should use the"Policy Name" for thenetwork

traffic typefor ease of identification.

 Source Address – Definethe source address of packets here. It has two types: IPaddress or MAC

address. If you select IP address you can definetheIP address range; otherwise you can define
up to four MAC addresses.

 Destination Address– Definethe destination address of packets here. The explanation is as thesame

as above.

 Protocol Type– Thefield defines traffic packet type, i.e. IP, TCP and UDP.
 Source Port – Define the source port of the packets here.
 Destination Port – Define thedestination port of thepackets here.
 Priority Queue– Determines if a packet meets all conditions defined above andwill beserviced with a

defined priority level.