Humax CX PVR-9200C - Manual (Page 75)

11.2 Updating Software from Menu
1. Press the MENU button.
2. Select Installation using the button and press the OK
or button.
3. Enter the password using the NUMERIC(0-9) buttons.
4. Select Software Update using the button and press the
OK or button.
Note: The default password is 0000. If you have forgotten the password, please contact your local product
distributor.
1. Automatic Update
You can update software automatically.
1. Select Automatic Update using the button and press the
OK or button.
2. Automatically search for new software. Select Cancel and press
the OK button to finish search.
3. When detecting software update, the following result is displayed.
If new software is not found by automatic update, use manual
update.
4. Select Yes and press the OK button to start updating.
Select No and press the OK button to return to the previous
menu without updating.
5. When completing the software update, the product is
automatically powered off and on again.
**
11. Software Update
GB 74