Humax CX PVR-9200C - Manual (Page 45)

6.8 HDD Control
You can check the free space of the hard disk drive and format (erase) the disk drive if necessary.
1. Press the MENU button.
2. Select Record using the button and press the OK or
button.
3. Select HDD Control using the button and press the OK
or button.
4. You can check the free, used, reserved and total space of the
HDD.
5. Select Format and press the OK button to remove all the
recorded programmes saved on the HDD and initialise the HDD.
6. Select Yes when the format confirmation message appears and
enter a password to start formatting the HDD.
**
Note:
• The format deletes all the recorded programmes saved on the
HDD including TV, radio, MP3s and photos. Formatting does not
delete the system files of the product.
• The default password is 0000. If you have forgotten the
password, please contact your local product distributor.
• A certain amount of space is reserved for TSR and PIP.
**
6. Recording and Playback
GB 44