Humax CX PVR-9200C - Manual (Page 73)

10.5 Default Setting
Default setting restores the product to the default settings.
Warning: Please note that once you perform default setting, all data such as channel list and user configured data
are deleted, no information on the HDD will be lost.
1. Press the MENU button.
2. Select Installation using the button and press the OK
or button.
3. Enter the password using the NUMERIC(0-9) buttons.
4. Select Default Setting using the button and press the OK
or button.
5. Select Yes and press the OK button to restore all setting to
factory default.
Select No and press the OK
or BACK button to return
to the previous menu.
6. Confirm again to start loading default setting. Enter the password
using the NUMERIC(0-9) buttons to perform restoring.
7. When completing the default setting, press the OK button to
automatically run the installation wizard.
For detailed information about the installation wizard, refer to
Chapter 3. Installation Wizard.
**
**
Note: The default password is 0000. If you have forgotten the password, please contact your local product
distributor.
10. Installation
GB 72