Humax CX PVR-9200C - Manual (Page 22)

3.3 Channel Search
Please wait until the channel search is complete.
1. During the channel search, the cursor is located at Stop.
Therefore, if you press the OK button during the search, the
search will stop and the channels found until then will be
displayed.
2. If the search does not find any channels, then press the OK
or button to access the installation menu to search for the
channels again. Please make sure that you have connected your
aerial correctly.
3. You can delete unwanted channels from the found channels.
Select the channels to delete and press the OK button.
Then select Delete and press the OK button. To delete all
channels, select Select All to select all channels, select Delete
and press the OK
button.
4. After completing the channel search and deleting unwanted
channels, select Save and press the OK button to save the
changes.
**
3.4 Time Setting
You can set the GMT offset for the current time.
1. Select GMT Offset using the button and press the OK
or button.
2. Select your GMT offset using the button and press the OK
button. GMT is changed by from 30 minutes to 1 hour.
3. Then select Next using the button and press the OK
button.
**
Note: The current time is set automatically whenever GMT offset
changes.
GB 21