Installation – Humax CX PVR-9200C User Manual
Page 69
1. Start/Stop Frequency
Select Start/Stop Frequency using the
button and press the OK
or
button. Enter the frequency using the NUMERIC(0-9) buttons.
2. Step
1. Select Step using the
button and press the OK
or
button.
2. Select the range of frequency to be increased by each step when
activating channel search using the
button and press the
OK
or
button. Select User Define to enter the value
directly. If you do not know the value, select Auto.
3. Network Search
1. Select Network Search using the
button and press the OK
or
button.
2. Select Enable/Disable using the
button and press the OK
or
button.
10. Installation
GB 68