Humax CX PVR-9200C - Manual (Page 68)

10. Installation
This chapter describes how to search for channels and other series of procedures.
**
Note:
• Press the BACK or button to save the changes and return to the previous menu.
Press the MENU or EXIT button to exit from the menu screen.
• You can easily select all menu items using the assigned number for each menu.
10.1 Automatic Search
Having the product connected to the cable and TV, you can perform automatic search without any additional information
necessary.
1. Press the MENU button.
2. Select Installation using the button and press the OK
or button.
3. Select Automatic Search using the button and press the
OK or button.
4. Automatic channel search begins.
10.2 Linear Search
You can search channels by defining the frequency range and other parameters. If you want to search for several
channels only, use the linear search instead of manual search.
1. Press the MENU button.
2. Select Installation using the button and press the OK
or button.
3. Select Linear Search using the button and press the OK
or button.
4. Enter the values for Start Frequency, End Frequency, Step,
Network Search and Append Symbol Rate.
10. Installation
GB 67