Humax CX PVR-9200C - Manual (Page 64)

2. Power On
You can set the time when the product is automatically powered on.
1. Select Power ON using the button.
2. Select Enable/Disable using the OK or button.
Enable Uses Power On and sets the Power On time.
Disable Does not use Power On.
**
3. When you have selected Enable, enter Channel No. and Time
using the NUMERIC(0-9) buttons and select OK and press the
OK
button.
3. Power Off
You can set the time when the product is automatically powered off.
1. Select Power OFF using the button.
2. Select Enable/Disable using the OK or button.
Enable Uses Power Off and sets the Power Off time.
Disable Does not use Power Off.
**
3. When you have selected Enable, enter Time using the
NUMERIC(0-9) buttons, select OK and press the OK button.
Note:
• Once Power On/Off is specified, it is repeated everyday.
• You can set the time when the product is automatically powered on/off overlapped with a recording schedule.
GB 63