Honeywell HRSD4 - Manual (Page 74)

Configuration
74
3. Highlight the Notify field and press to toggle between On and Off. When set
to On, the DVR notifies the remote site when certain events occur based on a
defined schedule.
4. Save your changes by highlighting OK and pressing . Select Cancel to exit
the screen without saving the changes.
Note For the Notify action to work, the DVR should be registered in the
RASplus (Remote Administration System).
When the DVR detects motion, the displays on each associated camera.
Text-In Event Action (Record) Setup Screen
The DVR can be set to react to text input from the text-in device. The text-in event can
be assigned any combination of the following:
• a schedule
• an associated camera
• a recording speed
• a video quality
• a dwell time
Note These procedures are the same for both Mode 1 and Mode 2.
Note You can only set Text-In Event Actions for devices you set up as
text-in devices. See
Setting Up the Text-In Feature on page 54 .
Highlight Text-In Event Action (Record) in the Event Action menu and press . The
Text-In Event Action (Record) setup screen appears.