Honeywell HRSD4 - Manual (Page 36)

Configuration
36
Setting Up Your DVR Using the Quick Setup Screen
Figure 3-4 Quick Setup Screen
The Quick Setup screen allows you to set up the most commonly used features of your
DVR. Use the arrows to move through the options. Press
to make your selections.
Table 3-2 Quick Setup Screen Options
Option Action
Quick Setup On/Off Highlight the field beside Quick Setup and press
to toggle between On and Off. If you select Off, use the
Normal Setup screen to change the settings.
Recording
Speed/Quality Highlight the first field beside Recording
Speed/Quality, and select recording speeds from as
few as 0.5 ips (images per second) to as many as 30
ips (25 ips for PAL).
Highlight the second field beside Recording
Speed/Quality, and select from Very High, High,
Standard, and Low.
Note The DVR has a maximum recording speed of 30 ips per camera. However,
the recording speed may not be achieved when averaged over all cameras.
Audio Highlight the field beside Audio Recording and select
either On or Off. When it is set to On, Camera 1 is
automatically associated with the audio input.
Note It is the user's responsibility to determine if local laws and regulations permit
recording audio.
Sequence Dwell Time Highlight the field beside Sequence Dwell Time and
select from 3 to 60 seconds for the camera sequence
dwell time.