Honeywell HRSD4 - Manual (Page 100)

Configuration
100
Loading Default Settings
1. Highlight and select Load Default Setup from the Config menu. A screen appears
that asks you if you really want to load default settings.
2. Confirm with a password that you want to load default settings.
Note Loading the Default Setup does not change the current time,
time zone, daylight saving time, and network settings.
Loading and Saving DVR Settings
The Load/Save screen allows you to load saved DVR settings or save the current DVR
settings.
Figure 3-63 Load / Save Setup Screen
Loading Saved DVR Settings
1. Connect to the DVR the USB device containing the setup file (.cfg).
2. Highlight Load - File Name and press . The Load Setup screen appears and
displays the setup file names that are available.
3. Select the desired setup file and press OK. The selected file name displays in the
File Name field.
4. Select Load to load the selected saved settings and change the DVR settings
accordingly.