Channel add/erase, Add channel, Erase channel – HANNspree MAC-001056 User Manual

Page 49

Text mode
Original mode

Channel Add/Erase

Press

the CH DOWN button to

select CH ADD/ERASE.

Press the VOL UP button. The OSD
menu display switches to the
following screen.

Press the CH UP/CH DOWN button on
the front panel to select a channel.

Add Channel

Then press the VOL UP button on the
front panel to add the selected channel.
The channel number changes from
yellow into green after adding the
channel.

Erase Channel

Then press the VOL DOWN button on
the front panel to erase the selected
channel. The channel number changes
from green into yellow after erasing the
channel.

TV
TV/CATV

AUTO PROGRAM

ADD/ERASE

SEL

ENTER

CATV

-ERASE ADD+

CH UP/DOWN

Note

You can still access the erased channel
by entering the channel number using
the number buttons on the remote
control. Add the channel again if it was
erased accidentally.