HANNspree MAC-001056 - Manual (Page 30)

29
Turning the TV On and Off
1
Press POWER on the remote
control or on the TV control panel. The
power LED indicator on the front of the
TV changes from red to green,
indicating that the power is on.
2
Press the POWER button again.
The power LED changes from green
to red, indicating that the TV is in
standby (off) mode.
Selecting Channels
1
Press the CH UP button to increase
the channel number by one.
2
Press the CH DOWN button to
decrease the channel number by one.
3
Enter the specific channel number by
pressing the number buttons on the
remote control. The channel is
displayed on the LCD panel.
MENU
MUTE SOURCE
CH VOL
CH 33
Power button
Power LED
Channel up
Channel down
MENU MUTE SOURCE
CH VO L
CH 33