Configuring the camera as a disk drive – HP M305/M307 User Manual
Page 93
Chapter 7: Troubleshooting and Support
93
Configuring the Camera as a Disk Drive
This method sets up your camera to function as a disk drive
when it is connected to your computer.
NOTE
This method may be unavailable with Windows 98
computers.
1
Set your camera to
Disk Drive
mode (you only need to do
this step once):
a.
Turn the camera on, then press the
Menu/OK
button to
display the
Capture Menu
.
b.
Use the button to navigate to the
Setup Menu
.
c.
Use the
button to highlight the
USB
menu option, and
then press
Menu/OK
.
d.
Use the button to select
Disk Drive
, and then press
Menu/OK
.
e.
Use the
button to highlight
EXIT
, and then press
Menu/OK
.
2
When you have set your camera to
Disk Drive
mode,
connect the camera to your computer using the USB cable.
3
At this point, the process for transferring images is the same
on page 90. On Windows computers, the camera will
appear as a removable disk in the Windows Explorer
screen. On Macintosh computers, either the Image Capture
or iPhoto application will launch automatically.
4
When you have finished transferring images from the
camera to the computer, simply disconnect the camera from
the computer. If your computer is running Windows 2000 or
XP, you may get an “Unsafe Removal” warning upon
disconnecting the camera. You can disregard this warning.