Date & time – HP M305/M307 User Manual
Page 82
82
HP Photosmart M305/M307 User’s Manual
Date & Time
This setting allows you to set the date/time format, as well as
the current date and time for the camera. This is usually done
when you first set up the camera; however, you may need to
re-set the date and time when you are travelling to different
time zones, after the camera has been without power for an
extended time, or if the date and time is incorrect.
NOTE
The date/time format chosen will be used to display the
date information in
Playback
. Also, the format chosen in
this setting is what is used in the
Date & Time Imprint
1
In the
Setup
Menu
(page 79), select
Date & Time.
2
In the
Date & Time
sub-menu,
adjust the value of the highlighted
selection by using the
buttons.
3
Press the
buttons to move to
the other selections.
4
Repeat steps 2 and 3 until the
correct date/time format, date, and time are set.
5
Press
Menu/OK
to save the setting and return to the
Setup
Menu
.
The date/time format setting remains in effect until it is
changed again, even when you turn the camera off. The date
and time settings also remain current as long as the camera
batteries that are installed have a charge, or the camera is
connected to an optional HP AC power adapter.