beautypg.com

Setting the flash – HP M305/M307 User Manual

Page 36

background image

36

HP Photosmart M305/M307 User’s Manual

NOTE

Digital zoom reduces the resolution of an image, so

your picture will tend to be more pixilated than the same

image taken with optical zoom. If you just intend to e-mail

an image or post it to a website, this loss of resolution will

not be noticeable; but in situations where the highest

quality counts (such as printing), limit the use of digital

zoom. It is also recommended that you use a tripod when

using digital zoom.

Setting the Flash

The

Flash

button allows you to cycle through the flash settings

on the camera. To change the flash setting, press the

Flash

button until the desired setting appears on the Image Display.

The following table describes each of the flash settings on

the camera.

NOTE

The flash is disabled with the

Burst

setting,

Fast Shot

shooting mode, and while recording video clips.

Setting Description

Auto Flash

The camera measures light and uses the flash if

necessary.

Red-Eye

The camera measures the light level and uses the flash

with red-eye reduction if necessary (see the following

NOTE for a description of red-eye reduction).

Flash On

The camera always uses flash. If the light is behind

your subject, you can use this setting to increase the

light on the front of your subject. This is called “fill-

flash.”

A

A