Hunter Fan 44668 - Manual (Page 37)

37
Auto Season Changeover
When the System Selection is in AUTO position, the
thermostat will automatically change between Heating
and Cooling systems, depending on your program. We
recommend keeping your programmed heating and
cooling temperatures at least 5°F (3°C) apart to allow
the Auto Season Changeover to occur when the appro-
priate temperature span has been reached. However,
if your heating and cooling programs set temperatures
are close, there is a built-in program to prevent the
thermostat from changing unnecessarily.
Auto Season Changeover is disabled when the thermo-
stat is in Temporary or Permanent Override, or Vacation
Hold, as these overrides are energy saving settings.
While in any of these modes, “AUTO” will be temporar-
ily removed form the LCD display. “AUTO” will return
when these holds are cleared. Auto Season Change-
over will still function in Home Today mode, as this is a
comfort setting.
For example, you may have the following temperatures
programmed at a given time:
Heat Set Temp = 68°F
Cool Set Temp = 78°F
If the room temperature rises above 78°F, then the ther-
mostat will automatically change to cool mode and turn
on the air conditioner.
Likewise, the thermostat will automatically change to
heat mode and turn on heat when the room tempera-
ture falls below 68°F.
Even when in the “Auto” position, Cool Mode and Heat
Mode still have to be programmed separately to allow
for the “Set Back” periods.