Hunter Fan 44668 - Manual (Page 34)

34
OPERATION
Temporary Manual Override
To temporarily change the current set temperature without affecting your program:
■ Press or and hold for about 1 second to
enter Manual Override mode. Display will flash.
■ Press or to change to your desired new
temperature.
■ Press to return to normal mode, or wait 5 seconds for it to
return automatically.
■ The current program number will flash to signify the Tempo-
rary Override.
■ At the next program change, the Temporary Override is
canceled, and the next program temperature becomes the
setpoint temperature.
To end the Temporary Manual Override:
■ Press to return the set temperature to the current program set temperature.
NOTE: The Auto Season Changeover feature will not operate while the thermostat is in Temporary Manual
Override. Refer to the Auto Season Changeover feature on page 39 for more information
.
NOTE: If Vacation Hold is set, then the number of days remaining will also be displayed. Refer to the Vaca-
tion (Programmable) Hold section on page 36 for more information.
ret/clear
ret/clear