Service menu, Restoring the factory-set defaults, Cleaning the paper path – HP 2605dtn User Manual
Page 178: Calibrating the printer
●
Connectivity Problems. View Help topics that can help you solve networking problems.
●
Troubleshooting Tools. Employ such troubleshooting tools as a cleaning page or a color
troubleshooting page to maintain the printer.
NOTE
Other tabs on HP ToolboxFX might be helpful in troubleshooting printer problems. For
information about the other tabs on HP ToolboxFX, see
.
Service menu
Use the control-panel Service menu to troubleshoot printer problems.
Restoring the factory-set defaults
Restoring the factory-set defaults returns all of the settings to the factory defaults.
To restore the factory-set defaults
1.
Use the (
Left arrow
) or the (
Right arrow
) button to select Service, and then press
(
Select
).
2.
Use the (
Left arrow
) or the (
Right arrow
) button to select Restore defaults, and then
press (
Select
).
The printer automatically restarts.
Cleaning the paper path
The printer features a special cleaning mode to clean the paper path.
NOTE
If you have access to HP ToolboxFX, HP recommends cleaning the paper path by
using HP ToolboxFX.
To clean the paper path
1.
Use the (
Left arrow
) or the (
Right arrow
) button to select Service, and then press
(
Select
).
2.
Use the (
Left arrow
) or the (
Right arrow
) button to select Cleaning Mode, and then press
(
Select
).
A page feeds through the printer slowly. Discard the page when the process is completed.
3.
Load plain letter or A4 paper when you are prompted.
4.
Press (
Select
) again to confirm and begin the cleaning process.
A page feeds through the printer slowly. Discard the page when the process is completed.
Calibrating the printer
Calibrations are performed at regular intervals. For best print quality, a calibration can be performed
from the control panel. For more information about calibrating the printer, see
.
166
Chapter 12 Problem solving
ENWW