Programming the interface, Introduction, Programming the interface - plug and play – Honeywell XENON 1902 User Manual
Page 35: Keyboard wedge, Laptop direct connect, Chapter 2 - programming the interface, Keyboard wedge -1 laptop direct connect -1
2 - 1
2
Programming the Interface
Introduction
This chapter describes how to program your system for the desired interface.
Programming the Interface - Plug and Play
Plug and Play bar codes provide instant scanner set up for commonly used
interfaces.
Note: After you scan one of the codes, power cycle the host terminal to have
the interface in effect.
Keyboard Wedge
If you want your system programmed for an IBM PC AT and compatibles
keyboard wedge interface with a USA keyboard, scan the bar code below.
Keyboard wedge is the default interface.
Note: The following bar code also programs a carriage return (CR) suffix.
Laptop Direct Connect
For most laptops, scanning the Laptop Direct Connect bar code allows
operation of the scanner in parallel with the integral keyboard. The follow-
ing Laptop Direct Connect bar code also programs a carriage return (CR)
suffix and turns on Emulate External Keyboard (
IBM PC AT and Compatibles with
CR suffix
Laptop Direct Connect
with CR suffix