HP Getting Started Guide User Manual
Page 50
46
HP Media Center PC Getting Started Guide
Retasking front-panel connectors
To retask using the Audio Wizard (type
6-connector):
With the Audio Wizard enabled, both the
microphone connector and the headphones
connector on the front of the PC can be retasked to
perform a different audio function. These two
connectors are universal audio jacks. When you
plug in a cable, the wizard asks you to select the
function for the cable from a list, and then it sets the
universal audio jack to perform as the selected
function. The functions are:
■
Stereo speaker (out)
■
Microphone (in)
■
Headphone (in)
■
Audio line in
1
Follow steps 1 through 7 of the procedure
“The Sound Effect Manager control
screens.”
2
When you plug in a cable, the wizard asks
you to select the device you plugged in from
a list.
3
Close the window.
Disabling digital audio output with Sound Effect Manager (optional)
To disable digital audio output:
1
Follow the procedure “Configuring Audio
Output with Sound Effect Manager” on
page 44.
2
Click the Digital Audio button. Select
Digital output off (you can also select
Digital-in to Digital-out pass through
mode).
3
Close the window.
If you select Enable digital audio output, the
microphone volume setting becomes not muted and
the recording source is fixed in Stereo Mix. If you
place the microphone too close to the speakers,
feedback can occur.