Harman-Kardon AVR 265 - Manual (Page 52)

AVR
52
Appendix
Table A12 – Surround Modes – continued
Surround Mode Description Incoming Bitstream or Signal
dtS neo:6
mode group
dtS neo:6 analog processing is available with dtS and dtS 96/24 signals and
two-channel analog or pcm signals to create a 3-, 5- or 6-channel presentation.
See below
dtS neo:6
cinema
depending on the number of speakers in your system, select 3-, 5- or 6-channel
modes, enhanced for movie or video presentations.
dtS 2/2/.0 or .1, 3/2/.0 or .1 •
dtS 96/24 •
Analog (two-channel) •
pcm (32khz, 44.1khz or 48khz) •
dtS neo:6
music
Available only in 5- and 6-channel modes, creates a surround presentation
suitable for music recordings.
dtS 2/2/.0 or .1, 3/2/.0 or .1 •
dtS 96/24 •
Analog (two-channel) •
pcm (32khz, 44.1khz or 48khz) •
logic 7
mode group
A hArmAn proprietary technology, logic 7 technology enhances two-channel
and matrix-encoded recordings by deriving separate information for the surround
back channels. It provides more accurate placement of sound, improves panning
and expands the sound field, even when used with 5.1-channel systems.
logic 7 technology uses 96khz processing and is available in 5.1-or 7.1-channel
modes. three variants are available.
See below
logic 7
movie
especially suited to two-channel sources containing dolby Surround or matrix
encoding, logic 7 movie mode increases center-channel intelligibility. the Avr is
programmed at the factory to default to this mode for two-channel signals.
Analog (two-channel) •
tuner •
pcm (32khz, 44.1khz, 48khz, 96khz) •
logic 7
music
logic 7 music mode is well suited to conventional two-channel music recordings. Analog (two-channel) •
tuner •
pcm (32khz, 44.1khz, 48khz, 96khz) •
logic 7
game
use logic 7 game mode to enhance enjoyment of video-game consoles. Analog (two-channel) •
tuner •
pcm (32khz, 44.1khz, 48khz, 96khz) •
5-channel Stereo useful for parties, the left- and right-channel information is played through both
the front and surround speakers on each side, while the center speaker plays a
summed mono mix.
Analog (two-channel) •
tuner •
pcm (32khz, 44.1khz, 48khz, 96khz) •
7-channel Stereo expands the 5-channel Stereo presentation to include the surround back
channels.
Analog (two-channel) •
tuner •
pcm (32khz, 44.1khz, 48khz, 96khz) •
2-channel Stereo turns off all surround processing and plays a pure two-channel signal or a
downmix of a multichannel signal. the signal is digitized and bass management
settings are applied, making it appropriate when a subwoofer is used.
Analog (two-channel; dSp downmix available for multichannel) •
tuner •
pcm (32khz, 44.1khz, 48khz, 96khz) •
0295CSK - HK (x65Series) AVR3650_365_2650_265 CORE OM, WORK18 danny.indd 52 01/07/11 11:34:13