Harman-Kardon AVR 265 - Manual (Page 3)

AVR
3
EN
GL
ISH
Introduction, Supplied Accessories,
Important Safety Information and Place the Receiver
Introduction
Thank you for choosing this Harman Kardon product!
for more than fifty years, the harman kardon mission has been to share a passion for music
and entertainment, using leading-edge technology to achieve premium performance.
Sidney harman and bernard kardon invented the receiver, a single component designed
to simplify home entertainment without compromising performance. over the years,
harman kardon products have become easier to use, while offering more features and
sounding better than ever.
the Avr 3650, Avr 2650, Avr 365 and Avr 265 7.1-channel digital audio/video receivers
continue this tradition with some of the most advanced audio and video processing
capabilities yet, and a wealth of listening and viewing options.
to obtain the maximum enjoyment from your new receiver, please read this manual and
refer back to it as you become more familiar with its features and their operation.
If you have any questions about this product, its installation or its operation, please
contact your harman kardon retailer or custom installer, or visit the web site at
www.harmankardon.com.
Supplied Accessories
the following accessory items are supplied with your receiver. If any of these items are
missing, please contact your harman kardon dealer or harman kardon customer service
at www.harmankardon.com.
System remote control •
Zone 2 remote control (Avr 3650/Avr 365 only) •
ezSet/eq • ™ microphone
Am loop antenna •
fm wire antenna •
Six • AAA batteries (Avr 3650/Avr 365); four AAA batteries (Avr 2650/Avr 265)
Ac power cord •
IMPORTANT SAFETY INFORMATION
Verify Line Voltage Before Use
the Avr 3650 and Avr 2650 have been designed for use with 120-volt Ac current.
the Avr 365 and Avr 265 have been designed for use with 220 – 240-volt Ac current.
connection to a line voltage other than that for which your receiver is intended can
create a safety and fire hazard and may damage the unit. If you have any questions
about the voltage requirements for your specific model, or about the line voltage in your
area, contact your selling dealer before plugging the unit into a wall outlet.
Do Not Use Extension Cords
to avoid safety hazards, use only the power cord supplied with your unit. we do not
recommend that extension cords be used with this product. As with all electrical
devices, do not run power cords under rugs or carpets, or place heavy objects on them.
damaged power cords should be replaced immediately by an authorized service center
with a cord meeting factory specifications.
Handle the AC Power Cord Gently
when disconnecting the power cord from an Ac outlet, always pull the plug; never pull
the cord. If you do not intend to use your receiver for any considerable length of time,
disconnect the plug from the Ac outlet.
Do Not Open the Cabinet
there are no user-serviceable components inside this product. opening the cabinet may
present a shock hazard, and any modification to the product will void your warranty.
If water or any metal object such as a paper clip, wire or staple accidentally falls inside
the unit, disconnect it from the Ac power source immediately, and consult an authorized
service center.
CATV or Antenna Grounding (AVR 3650/AVR 2650)
If an outside antenna or cable system is connected to this product, be certain that it is
grounded so as to provide some protection against voltage surges and static charges.
Section 810 of the united States national electrical code, AnSI/nfpA no. 70-1984,
provides information with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes and
requirements of the grounding electrode.
note to cAtv SyStem InStAller: this reminder is provided to call the cAtv (cable tv)
system installer’s attention to article 820-40 of the nec, which provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected
to the grounding system of the building, as close to the point of cable entry as possible.
Place the Receiver
place the receiver on a firm and level surface. be certain that the surface and any •
mounting hardware can support the Avr’s weight.
provide proper space above and below the receiver for ventilation. If you install the
•
receiver in a cabinet or other enclosed area, provide cooling air within the cabinet.
under some circumstances, a fan may be required.
do not obstruct the ventilation slots on the top of the receiver or place objects directly
•
over them.
do not place the receiver directly on a carpeted surface.
•
do not place the receiver in moist or humid locations, in extremely hot or cold locations, •
in areas near heaters or heat registers, or in direct sunlight.
0295CSK - HK (x65Series) AVR3650_365_2650_265 CORE OM, WORK18 danny.indd 3 01/07/11 11:33:28