Hand Held Products 9500 - Manual (Page 194)

9 - 24 Dolphin® 9500 Series User’s Guide
GPRS Settings
After subscribing to a GPRS network and installing your SIM card, you can load the parameters of your GPRS subscription into
the terminal. However, some subscriptions load automatically when you install your SIM card. If the GPRS settings do not load
automatically, you must enter them manually.
uPhone includes a pre-configured GPRS connection in Internet Settings. You need to select or create GPRS settings prior to
making a GPRS call for the first time. You can also configure GPRS settings for browsing the web via a VPN or Proxy Server.
Requirements
Make sure that you are not using ActiveSync when configuring the connection settings.
To establish a GPRS connection, you need to review the information from your network service provider. Because there can be
so many different configurations, such as VPN or Proxy Server connections, see
Connections Tab on page 5-17 for instruction
about how to set up each kind of connection.
To Select Pre-Configured GPRS Settings
1. Tap Start > System > Connections tab > uPhone GPRS. The GPRS Settings screen appears displaying the default set-
tings.
The Current Profile drop-down list contains a number of pre-configured connection profiles.
2. If the profile associated with your account appears in the list, select it. If it does not appear in the Current Profile list, you
need to create one. For details, see To Add a GPRS Setting on page 9-25.
3. In the Details section
• Type in the APN number
• Type in the IP address
• Select the Protocol
4. Tap OK to save.
Note: Select Reset security settings to reset the username and password, see To Add a GPRS Setting on page 9-25.