Hayter Mowers RT380H - Manual (Page 45)

Problem Possible Cause Corrective Action
1. The drive control is in the Push position. 1. Move the drive control to the Operate
position.
2. The traction belt is worn, loose, or
broken.
2. Contact an Authorized Service Dealer.
The tractor does not drive.
3. The traction belt is off of the pulley. 3. Contact an Authorized Service Dealer.
1. The tyre pressure is incorrect. 1. Set the tyre pressure.
2. The cutter deck is not level. 2. Level the cutter deck from side-to-side
and front-to-rear.
The cutter deck is cutting unevenly.
3. The underside of the cutter deck is
dirty.
3. Clean the underside of the cutter deck.
45