Hayter Mowers RT380H - Manual (Page 33)

Figure 42
1. Fill plug
5. Remove the fill plug and check the fluid level.
Note: The level should be a maximum of 1-1/4 inch
(32 mm) below the top of the fill port (Figure 42).
Add fluid if necessary.
6. Install the fill plug.
Cooling System
Maintenance
Cleaning the Cooling System
Service Interval: Every 100 hours
Use a dry brush to clean grass and accumulated debris
from the engine daily.
Important: To prevent contaminating the fuel
system, do not use water to clean the engine.
33