Rtc battery – HP 110 User Manual
Page 57

4.
).
5.
).
Remove the memory module:
1.
Pull away the retention clip (1) on each side of the memory module to release the module. (The
memory module (2) tilts up.)
CAUTION:
To prevent damage to the memory module, hold it by the edges only. Do not touch
the components on the memory module.
2.
Remove the memory module (3) by pulling the module away from the slot at an angle.
NOTE:
Memory modules are designed with a notch (4) to prevent incorrect insertion.
Reverse this procedure to install the memory module.
RTC battery
Description
Spare part number
RTC battery
599516-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Component replacement procedures
49