Hitachi DZMV100A - Manual (Page 78)

78
chapter 3_Recording
Checking movie quality mode
You can check whether movie quality mode is FINE or
STND by reviewing the on-screen information.
The setting of movie quality mode will not change when the DVD camcorder is turned
off. After recording with “STND”, it is recommended that you return the mode to
“FINE” and then turn the DVD camcorder off, unless you always record with “STND”.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Adjusting Exposure Manually
This DVD camcorder measures the subject brightness and automatically adjusts the
exposure. For special effects recording, you can also adjust the exposure manually.
1. Press the EXPOSURE button in the re-
cording pause status.
Tip:
• Pressing EXPOSURE will alternate between manual
adjustment and auto exposure. With auto exposure, no
indication will appear on the screen.
The exposure indicator will appear on the screen.
2. While monitoring the subject image on the screen, turn the Select
dial to adjust the exposure.
3. After exposure adjustment is complete, press the Select dial.
The adjusted exposure will lock.
To return to automatic exposure from locked manual exposure, press the EXPO-
SURE button twice.
Movie quality mode
Exposure indicator
EXPOSURE