Hitachi DZMV100A - Manual (Page 12)

12
DVD camcorder 8 cm DVD-RAM
disc
Power cable
Trial Record and Play Back
Power the DVD camcorder from AC outlet, make a trial recording and play it back. For
actual take, thoroughly read “Setups” and “Recording” to ensure correct use of the
DVD camcorder.
Caution
• Before beginning this manual, refer to “Checking Provided Accessories” on page 26 and make sure
that all accessories are provided in package.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Necessary Devices
When using a battery pack, charge it or refferring to page 40.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Making a Trial Recording
1. Make sure that the RECORDING MODE
switch is set to “[ ] movie”.
2. Connect the AC adapter/charger to the DVD camcorder.
2-1 Attach the terminal device of provided DC power cable to the battery at-
tachment platform on DVD camcorder.
Align the top of terminal device with the top of battery attachment platform,
and, while fitting it onto the DVD camcorder, slide it downward until a click is
heard.
AC adapter/
charger DZ-ACP1
DC power cable