Hitachi DZMV100A - Manual (Page 23)

23
ACCESS
Cautions When Using
Be careful when removing the DVD-RAM disc:
When the DVD camcorder is used for a long period of time, the temperature of DVD-
RAM disc will be high: Wait for a few moments before removing the disc after the DVD
camcorder is turned off.
Do not turn the DVD camcorder off while the ACCESS indicator is blink-
ing:
The ACCESS indicator is blinking to show that data
is being written to DVD-RAM disc, or being read from
it. Do not do any of the following so as not to dam-
age the data:
•
Remove battery pack.
• Disconnect AC adapter/charger.
• Plug or unplug PC connection cable.
• Remove DVD-RAM disc.
If the DVD camcorder is turned off while the ACCESS
indicator is blinking, turn it on again with the disc car-
tridge loaded in the DVD camcorder.
Do not wipe the DVD camcorder case with benzene or thinner:
• The coating of case could peel off or the case could deteriorate.
• When using chemical cleaning cloth, follow the instructions.
Also read the instructions attached with optional accessories:
For optional accessories, follow the cautions and instruction manuals attached.
Use the AC adapter/charger only in a well-ventilated, open space:
Do not use the AC adapter/charger in a narrow space where flow of air is blocked, or
where it is very near any object or inside any object: Ignoring this will increase heat
inside the AC adapter/charger, which could cause fire, burns, electric shock or fault.