Hitachi DZMV100A - Manual (Page 141)

141
Viewing on TV Screen
Tip:
• The infrared remote control is useful when operating the DVD camcorder while viewing an
image on TV screen. However, if you use a Hitachi VCR, the remote control may inadvertently
operate the VCR if it is near the DVD camcorder. To prevent this, set the remote control code of
the VCR to a position other than "VCR2".
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Switching On-Screen Information Off
You can switch off the on-screen information that is displayed in the viewfinder or on
the LCD screen, from TV screen.
You can also use the EXT. DISPLAY button on the remote control to switch the set-
ting.
1. Press the MENU button in the recording pause status to display the
menu screen.
2. Use the Select dial to choose “OTHER
SETUP” and then “E. DISPLAY”.
Options will be next to “E. DISPLAY”: “LINE ON”
is being highlighted.
3. Turn the Select dial to change the option
to “LINE OFF”, and then press the Select
dial.
The menu screen for setting others will be re-
stored, and “E. DISPLAY” has been specified as
“LINE OFF”.
4. Press the MENU button to switch off the menu screen.
If no on-screen information appears on the TV, check the viewfinder or LCD screen.
Caution:
• The on-screen information during playback will also appear even if "E. DISPLAY" is specified "LINE
OFF".