HP QMS 1660E - Manual (Page 88)

Printer Engine
Features
QMS 1660E Print System Reference 4-56
Horizontal and Vertical Controls
Horizontal and vertical controls are based on the leading edge of the
paper. Although they are consistent, they may seem to be reversed in
function, depending on the leading edge of the paper.
n
Media fed long edge first (for example, letter/A4) with por-
trait-oriented printing—horizontal and vertical seem reversed.
n Media fed long edge first (for example, letter/A4) with land-
scape-oriented printing — horizontal and vertical operate as
expected.
n
Media fed short edge first (for example, 11x17/A3) with por-
trait-oriented printing—horizontal and vertical operate as
expected.
n Media fed short edge first (for example, 11x17/A3) with land-
scape-oriented printing—horizontal and vertical seem
reversed.
Image Alignment Guidelines
Use the following table to determine which value to adjust and
whether to increase or decrease it to get the desired results:
With this
feed
edge... and this
orienta-
tion... ...adjust this control to move the image...
up down right left
short edge portrait vertical
below 100 vertical
above 100 horizontal
above 100 horizontal
below 100
landscape horizontal
above 100 horizontal
below 100 vertical
above 100 vertical
below 100
long edge portrait horizontal
above 100 horizontal
below 100 vertical
above 100 vertical
below 100
landscape vertical
above 100 vertical
below 100 horizontal
below 100 horizontal
above 100