Set linefeed (line termination) – HP QMS 1660E User Manual
Page 263
Updated DOC
Commands
C-17
Document Option Commands
Set Linefeed (Line Termination)
Notes
The result of various settings for these parameters is
shown in table below, in terms of the equivalent code
passed to the PCL line termination command
(
). The second setting (lfiscrlf on, criscrlf
off) is correct for most ASCII listings printed from
UNIX machines. PC listings should usually be done
with both items set to off, and Macintosh listings
usually require the third setting (lfiscrlf off, criscrlf on).
The following table shows the criscrlf/lfiscrlf
commands and the corresponding PCL Line
Termination command parameters.
LFISCRLF
CRISCRLF
PCL Code
Comments
Off
Off
0
CR
→
CR,LF
→
LF,FF
→
FF
On
Off
2
CR
→
CR,LF
→
CR-LF,FF
→
CR-FF
Off
On
1
CR
→
CR-LF,LF
→
LF,FF
→
FF
On
On
3
CR
→
CR-LF,LF
→
CR-LF,FF
→
CR-FF
Syntax
%%IncludeFeature:lfiscrlf
(value)
Purpose
Controls the default line termination mode (the
command); specifies the line termination treatment of a linefeed.
Variable
value
Purpose
Specifies whether a linefeed is treated simply as a
linefeed or as a carriage return-linefeed combination
Range
Off/false
—
Treats linefeed as a linefeed.
On/true
—
Treats linefeed as carriage return-linefeed
combination
Default
Printer configuration dependent