HP AUTOMATIC XT SPAY GUNS 311051D - Manual (Page 3)

Models
311051D 3
Models
* Hardened SST needle tip/nozzle (not recommended for thin fluids). All other models have PEEK needle tip.
A manifold is required for each gun to be installed.
Refer to the Parts section for manifold information.
Orifice Size
in. (mm) HVLP Compliant Airspray
.030 (0.75) 249388 249407 249369
.042 (1.0) 249389 249408 249370
.055 (1.4) 249390 249409 249371
.070 (1.8) 249391 249410 249372
*.042 (1.0) Hardened SST 249394 288049 249375
*.055 (1.4) Hardened SST 249395 288050 249376
.030 (0.75) with Fluid Control Knob 249396 249411 249377
.042 (1.0) with Fluid Control Knob 249397 249412 249378
.055 (1.4) with Fluid Control Knob 249398 249413 249379
.070 (1.8) with Fluid Control Knob 249399 249414 249380