HP AUTOMATIC XT SPAY GUNS 311051D - Manual (Page 33)

Accessories
311051D 33
Accessories
Cleaning Brush 105749
For use in cleaning gun.
Lubricant 111265
One 4 oz. (113 gram) tube sanitary (non-silicone) lubri-
cant for fluid seals and wear areas.
Fluid Hose Parts Breakdown
Alternate Nozzle Sizes
Retrofit Adapter Plate 288197
The retrofit adapter plate enables the manifold to be
attached to a variety of bolt patterns.
HVLP Pressure Verification Kit
For use in checking air cap atomizing or pattern air pres-
sure at various supply air pressures. Not to be used for
actual spraying.
Install the kit air cap on the gun. Turn on the air to the
gun, then trigger the gun and read the air pressure on
the gauge.
Fluid Control Knob Repair Kit 288138
Includes spring, ball, and retaining clip.
Part No. Description
239629 FITTING, assy, swivel
061345 TUBING, 1000 ft. (305 m) roll
Nozzle
Orifice Size
in. (mm)
Needle/
Nozzle Kit
Needle
Assy.
Needle
Tip
Qty. 1
Nozzle
0.059 (1.5) N/A 288177 234778 234745
0.086 (2.2) 15F833 288179 234779 234747
0.110 (2.8) 15F834 288180 234780 234748
0.070 (1.8)
Hardened SST
N/A 288182 N/A 234751
To be “HVLP compliant”, the atomizing air pressure
must not exceed 10 psi (70 kPa, 0.7 bar).
Part No. Orifice in. (mm)
234736 0.030 - 0.070 (0.8 - 1.8)
234737 0.086 (2.2)
234738 0.110 (2.8)
F IG . 27: HVLP Pressure Verification Kit
TI7637a