HP h5400 - Manual (Page 95)

Using the Wireless LAN
Reference Guide 3–9
6. Tap “Use server-assigned IP address” and use the DHCP
server address or select “Use specific IP address.”
7. If you selected “Use specific IP address,” you must enter
information in all remaining fields.
✎
Contact your network administrator or your service provider for
this information.
8. Tap Finish.
Create Profiles with Security
You can use encryption to increase security to prevent data theft.
This device supports open system (no encryption), 64-bit shared
key, and 128-bit shared key encryption.
The wireless access point that you are connecting to must use the
same encryption to receive and transmit data.
To create profiles with security:
1. Follow steps 1 through 6 in the section “Create Profiles
without Security.”
2. Tap Next.
3. Select “64” or “128” bit from the Wireless Encryption down
arrow list.
4. Select “hexadecimal” or “alphanumeric” from the WEP
Keys down arrow list.
5. Enter valid keys.