HP 5400ZL User Manual
Page 392
---------------- --------- ------------- ------
QinQ (Provider Bridging)
Displaying QinQ Config and Status
Displaying the Configuration for a Particular VLAN.
This command
uses the VID to identify and display the data for a specific VLAN. Once QinQ
is enabled in mixed vlan mode, an additional field showing the VLAN Type is
added to the display output.
Syntax:
show vlans < vlan-id >
(Changes to parameters when QinQ is enabled:)
VLAN ID: Field name changes from 802.1Q VLAN ID to VLAN
ID only.
Type: In a QinQ enabled environment, the VLAN type can be
either a regular customer VLAN CVLAN, or it can be a tunnel
VLAN in the provider network SVLAN.
For example:
ProCurve Switch (config)# show vlan 10
Status and Counters - VLAN Information - Ports - VLAN 10
VLAN ID : 10
Name
: Vlan-10
Type
: SVLAN
Status : Port-based
Voice
: No
Jumbo
: No
When QinQ is enabled,
the VLAN Type field is
displayed.
Port Information Mode
Unknown VLAN Status
1
Untagged
Disable
Down
2
Untagged
Disable
Down
3
Untagged
Disable
Down
4
Untagged
Disable
Down
5
Untagged
Disable
Down
Figure 8-11. Example of “Show VLAN” for a Specific VLAN (QinQ Enabled)
8-26