HP 5400ZL - Manual (Page 252)

Quality of Service: Managing Bandwidth More Effectively
Globally-Configured QoS
Syntax: show qos tcp-udp-port-priority
Displays a listing of all TCP and UDP QoS classifiers
currently in the running-config file.
Example. This example shows how to assign the following DSCP policies to
packets that match the specified TCP and UDP port applications:
Port Applications DSCP Policies
DSCP Priority
23-UDP 000111 7
80-TCP 000101 5
914-TCP 000010 1
1001-UDP 000010 1
1. Determine if the DSCP codepoints that you want to use to mark matching
packets already have an 802.1p priority assigned, which could indicate
use by existing applications (
show qos dscp-map command).
Note that a DSCP codepoint must also have a priority configured before
you can use it to mark matching packets.
The DSCP codepoints
have not yet been
assigned an 802.1p
priority level.
Figure 6-5. Displaying the Current DSCP-Map Configuration
6-30