HP 5400ZL User Manual

Page 209

Text mode
Original mode

Switch Meshing

Configuring Switch Meshing

The asterisk indicates
that you must reboot
the switch to cause the
Mesh configuration
change to take effect.

Figure 5-8. After Saving a Mesh Configuration Change, Reboot the Switch

8. Press

[0] to return to the Main menu.

9. To activate the mesh assignment(s) from the Main menu, reboot the

switch by pressing the following keys:

[6] (for Reboot Switch)

b. Space bar (to select

Yes).

13 (to start the reboot process).

(The switch cannot dynamically reconfigure ports to enable or disable mesh
ing, so it is always necessary to reboot the switch after adding or deleting a
port in the switch mesh.)

5-11

This manual is related to the following products:

6600