beautypg.com

Listing and code approvals – Hearth and Home Technologies CARODG36I User Manual

Page 4

background image

Outdoor Lifestyles by Hearth & Home Technologies Inc. • Carolina • 4066-300 • Rev. X • 6/13

4

1

1

Listing and Code Approvals

A. Appliance Certifi cation

This product is listed to ANSI standards for “Outdoor Open-
Flame Decorative Gas Appliances” and “Gas Fired Appli-
ances for Use at High Altitudes”.

MODELS: CARODG36I, CARODG36IL,

CARODG42I, CARODG42IL

LABORATORY: Underwriters Laboratories, Inc. (UL)
TYPE: Outdoor Open-Flame Decorative Gas Appliances
STANDARD:
ANSI Z21.97-2008

Note: This installation must conform with local codes. In the
absence of local codes you must comply with the
National
Fuel Gas Code, ANSI Z223.1-latest edition
in the U.S.A.
and the
CAN/CGA B149 Installation Codes in Canada.

Models

Min/Max Input

BTUH

Orifi ce Size

(DMS)

CARODG36I (NG)

36,000/55,000

#27 / .144

CARODG36IL (LP)

29,000/50,000

#46 / .081

CARODG42I

33,000/65,000

#24 / .152

CARODG42IL

37,000/62,000

#43 / .089

B. BTU Specifi cations

Note: This appliance, when installed, must be electrically
grounded in accordance with local codes, or in the absence
of local codes with the National Electrical Code, ANSI/
NFPA 70
, if applicable.

G. Fuel

This appliance must not be used to burn solid fuel.

C. High Altitude Installations

NOTICE:

If the heating value of the gas has been reduced,

these rules do not apply. Check with your local gas utility or
authorities having jurisdiction.

When installing above 2000 feet elevation:

In the USA: Reduce input rate 4% for each 1000 feet above
2000 feet.

• In CANADA: Reduce input rate 10% for elevations

between 2000 feet and 4500 feet. Above 4500 feet, consult
local gas utility.

Check with your local gas utility to determine proper orifi ce
size.

D. Non-Combustible Materials Specifi cation

Material which will not ignite and burn. Such materials are
those consisting entirely of steel, iron, brick, tile, concrete,
slate, glass or plasters, or any combination thereof.

Materials that are reported as passing ASTM E 136, Stan-
dard Test Method for Behavior of Materials in a Vertical
Tube Furnace at 750 ºC
shall be considered noncombus-
tible materials.

F. Electrical Codes

If this appliance will be wired, the following applies:

NOTICE:

This appliance must be electrically wired and

grounded in accordance with local codes or, in the absence
of local codes, with
National Electric Code ANSI/NFPA 70-
latest edition
or the Canadian Electric Code CSA C22.1.

E. Combustible Materials Specifi cation

Materials made of or surfaced with wood, compressed
paper, plant fi bers, plastics, or other material that can ignite
and burn, whether fl ame proofed or not, or plastered or
unplastered shall be considered combustible materials.

Note: See Section 6.A. for fl ame adjustment.

This manual is related to the following products: