beautypg.com

G. install firescreen – Hearth and Home Technologies CARODG36I User Manual

Page 23

background image

Outdoor Lifestyles by Hearth & Home Technologies Inc. • Carolina • 4066-300 • Rev. X • 6/13

23

G. Install Firescreen

Insert Rod

Figure 8.11

Insert Rod into Firescreen

Firescreen must be installed if not installing optional screen
door.
• Remove screen and screen rods from packaging.
• Lay the two sides of screen side by side, rings on top,

handles meeting in the middle.

Insert one screen rod through the rings on top. See Figure
8.11.

• Repeat for other screen.

Screw

for

left screen

Screw

for

right screen

Figure 8.12

Remove Screws from Firebox Top

• Insert left end of the rod in the left screen (handle is on

the right) into the hole in the upper left fi rebox side.

Insert Left

Screen Rod

Figure 8.13

Insert Screen Rod

• Remove two screws from the fi rebox top, set aside.

Fasten rod with one of the screws removed from the fi rebox
top, into the hole shown in Figure 8.12.

Figure 8.14

Fasten Screen Rod to Firebox Top

• Repeat with the right screen.

This manual is related to the following products: