Hearth and Home Technologies CARODG36I - Manual (Page 16)

Outdoor Lifestyles by Hearth & Home Technologies Inc. • Carolina • 4066-300 • Rev. X • 6/13 16
LOAD
LINE/ LIGNE
HOT
/TENSION
WHITE
/NEUTRE
HOT
/TENSION
WHITE
/NEUTRE
STRIP GUAGE
GABARIT DE DENUDAGE
O
T /TENSI
O HIT
E
/NEU
T H T
O
W
Grounding connection
to box (if box has a
grounding terminal)
Wire
connector
Junction
box
LINE cable brings
power to the GFCI
Yellow sticker remains
in place to cover the
LOAD terminals
Figure 6.9 Wire the GFI Receptacle
• Wire the GFI receptacle as shown below:
• Assemble the junction box.
Figure 6.10 Assemble Junction Box
Figure 6.11 Replace Control Cover
• Disconnect the battery holder wires from the red and
black wires of the wiring harness from the switch and
module. Connect the red and black wires of the wiring
assembly included with the electric kit to the red and
black wires to the switch and module. Plug the power
supply wire into the wire assembly and then into the
outlet. See Figure 6.12.
• If installing optional remote control, disconnect the
brown module wire from the red jumper wire. See
Figure 6.12. Follow the instructions included with the
remote control.
• Replace the cover on the control box.