Hearth and Home Technologies CARODG36I - Manual (Page 15)

Outdoor Lifestyles by Hearth & Home Technologies Inc. • Carolina • 4066-300 • Rev. X • 6/13 15
C. Installing the Optional Electric Kit
• Remove four screws to remove cover from the control
box.
Figure 6.3 Remove Control Cover
Remove
2 screws
Junction
Box Bracket
Figure 6.4 Remove Junction Box Bracket & Two Screws
Figure 6.6 Hand-bend Bracket
Figure 6.7 Fasten Bracket to Junction Box
Match holes
Figure 6.8 Place & Fasten Junction Box
• Remove the junction box bracket by prying loose with a
screwdriver. Remove the two screws shown in Figure 6.4.
Cut out and remove insulation from behind junction box
bracket as shown in Figure 6.5.
• Make hand bends to bracket as shown in Figure 6.6:
• Fasten bracket to junction box with two screws (provided
with junction box).
• Thread wire into junction box.
• Place junction box into the control box, matching holes
as shown, and fasten with the two screws removed in
Figure 6.4.
Figure 6.5 Cut and Remove Insulation