Hughes DIRECWAY AN4-074-DF - Manual (Page 26)

Chapter 2 • Antenna parts and required tools
10
1035567-0001 Revision A
Tools Table 2 lists the tools required to assemble, install, and point the
antenna.
Table 2: Tools required to install and point the antenna
Tool Details
Open-end wrench 1/2 in.
Open-end or
socket wrench
7/16 in.
Socket wrench or
adjustable wrench 5/16 in.
Socket wrench 1/2 in.
Torque wrench With 1/2-in. socket capable of torquing to
12 ft-lbf
Allen wrench 3 mm
Phillips-head screwdriver No. 2; needed if the optional shroud is
installed
Compass Hand-held
Pencil Carpenter’s pencil
Fine elevation pointing
tool Reusable